Consumables
1
Copper FR4 Boards
100
300x400 size , 1.6mm, 35 micron copper
2
Etching Chemicals
2
Ferric Chloride liquid, 40%, 25 Liter jerrycan
3
Developing Chemicals
1
Developer f. negative resist 1 bag f. 10L x 5 nos.
4
Stripping Chemicals
1
Stripper f. pos.+neg. resist 1 bag=250g, UN-No.: 1823 ADR-class 8 packing group II x 10 nos.
5
Etching Stain Remover
1
Stain remover RX3 1 KG x 5 Nos
6
Tinning Chemicals
1
Chemical tinning SUR-TIN PART I, 1-L-bottle sufficient for 5 sets of Sur Tin or 12.5 L ready made solution Part I: UN2796 SULPHURIC ACID class 8 PGII Chemical tinning SUR-TIN PART 2 and 3, set for 2.5 L ready made solution Teil II: not a dangerous good Teil III: UN3077 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. Class 9 PGIII150 ml of sulfuric acid 36% are required per batch!
7
Solder Mask Films
1
Solder Mask (1 Roll 305 mm x 76 m, 75 μm)
8
Reference pins for CCD CNC
2
Reference pins/rivets 3.0x5,4mm (1pack=100pc)
9
Through hole plating chemicals
1
Starter Kit for HiTec plate - 1 Set (2 sets required to fill the tank up initially) DS 270 Cleaner/Conditioner, not a dangerous good, 0.5L DS 400 Pre-Dlp, not a dangerous good, 25L DS 500 Activator (Catalyst) UN 3264 Corrosive liquid, n.o.s. 0.5L DS 650C Intensifier UN Nr. 3266 Corrosive liquid, n.o.s. 0.5L DS 650L Intensifier, not a dangerous good, 5L DS 650P Intensifier UN 1824 Sodium hydroxide solution 5L CU 400A Copper Plating, not a dangerous good, 1L CU 400C UN 3082 Environmentaiiy hazardous substance liquid, n.o.s. (Copper sulphate) 25L Please note: dionized water and sulphuric acid is not part of delivery, but must be obtained locally! We recommend to buy 2 sets ! One to Start and one for replenishment)
10
CNC Tools Set
1
Starter kit CCD consisting of: 40 PCB tungsten routers (10xG30Ḟ, 10xG60Ḟ, 5x0.8mm SCFT, 5x1.0mm SCFT, 2x1.2mm SCFT, 2x 1.5mm SCFT, 2x2.0mm SCFT, 2x2.5mm SCFT, 2x3.0mm SCFT), 40 tungsten carbide drills: (5x0.6mm, 5x0.7mm, 5x0.8mm, 5x0.9mm, 4x1.0mm, 3x1.1m)
11
Starter Kit for RMP 3545
1
Consumables starter set for RMP3545 100 pcs. FR4 350 x 450 x 0.3 mm 18/00 100 pcs. Prepregs 350 x 450 x 0.2 mm 50 pcs. FR4 350 x 450 x 0.5 mm 35/35 6 pcs. RMP alu press sheets 10 pcs. Separation foil 350 x 450 mm (50 pc.)
12
Tenting photoresist (1 Roll 304 mm x 152 m, 30 μm)
1
13
Board holder for Compacta 40/Hitec Plate model - 3 Nos
2
for 2 Galvanic tanks
14
1 Set of anodes for Compacta 40/Hitec Plate (2pc) 200x300x10mm
2
for 2 Galvanic tanks
15
Anode bag for Compacta 40/Hitec Plate (1 pc) 200 x 300
2
for 2 Galvanic tanks
16
Anode holder (1 pc)
2
for 2 Galvanic tanks
Last updated