Collet
ER collets have a wide clamping range and high accuracy. While they are designed for tool holding, they work great for work holding in small lathes. With a full set of ER collets you can hold any diameter that is in the clamping range of the set.
ER-32 standard size Collet is used at T-works for machining :
ER Collet | Length | Diameter | Clamping Range |
---|---|---|---|
ER-32 | 40 mm (1.57 ") | 33mm ( 1.30") | 1 - 21mm (0.039 - 0.827 ") |
The folllowing are the different sizes of ER -32 collet available at T-works :
Size | Range (mm) |
---|---|
1/16 " | 1.0 - 2.0 mm |
3/32" | 2.0 - 3.0 mm |
1/8" | 3.0 - 4.0 mm |
3/16" | 4.0 - 5.0 mm |
7/32" | 5.0 - 6.0 mm |
1/4" | 6.0 - 7.0 mm |
5/16" | 7.0 - 8.0 mm |
11/32" | 8.0 - 9.0 mm |
3/8" | 9.0 - 10.0 mm |
13/32" | 10.0 - 11.0 mm |
7/16" | 11.0 - 12.0 mm |
1/2" | 12.0 - 13.0 mm |
17/32" | 13.0 - 14.0 mm |
9/16" | 14.0 - 15.0 mm |
5/8" | 15.0 - 16.0 mm |
21/32" | 16.0 - 17.0 mm |
11/16" | 17.0 - 18.0 mm |
23/32" | 18.0 - 19.0 mm |
3/4" | 19.0 - 20.0 mm |
Last updated