🎰
CNC - 3 Axis Turn Mill
  • WELCOME
    • What is a CNC Router ATC
  • SPECIFICATIONS
    • What is its workflow
  • FUNCTIONS
    • Possible operations
    • Applications
    • Structure of the main components
  • CHUKS , COLLETS AND TOOL BITS
    • Difference between a Chuck , Collet and Tool bit ?
    • Collet
    • Tool Bits
  • Getting Started and Get Cutting !
    • Softwares used and File types
    • Materials
    • Setting up Design
    • Giving Toolpaths
    • Preview , Summary and Saving file
    • Executing
    • Controls
    • Startup Procedure
    • Change / Remove Tool
    • Calibrate New Tools
    • Set HOME
    • Set maximum depth and surface
    • Dry Run
    • Shutdown Procedure
  • Danger Areas and Safety Procedures
    • Do's and Dont's
    • Safety and Monitoring
    • Emergency Stop
    • Hazard Warning Areas of CNC
    • Danger Areas In Machine
    • Troubleshooting
  • Cleaning and maintenance
    • General
    • Daily Maintenance
    • Weekly maintenance
    • Monthly maintenance
    • Annual maintenance (By authorized maintenance personnel only)
  • Tips and Tricks
    • Tabs in Machining
    • Testing
    • Recovering loss of power
    • Special keys and shortcuts
    • Reference
    • Resources
    • Files
Powered by GitBook
On this page
  1. Getting Started and Get Cutting !

Set HOME

PreviousCalibrate New ToolsNextSet maximum depth and surface

Last updated 10 months ago

1.Press Jog arrows to place the center of the bit over the front rigth corner of the material.

2 .Press Jog speed to set the speed of the movement to slow , medium , or fast as necessary for the project and material

3 .Press set Home to to set the home location for the bit. The system will prompt the operator as to whether the selected position should be set as home , and display will read " press Down to set Rotation Point ". See rotate file for a description of this function

4 .Press Enter to confirm the position.