Startup Procedure
Honing
The machine needs to be honed so that the spindle warms up before performing any operation. The process of honing is explained below :
Turn ON the Main MCB
Turn ON the Multicam Control box
Follow the below operations to hone the machine :
Step 1
Step 2
Step 3
The spindle warms up at 3 different speeds's and gets readyd for machining
Turning on the Table Vaccum
The table vaccum must be on so that the surface and maximum depth can be set properly.
On compressor MCB
Turn on the Filter Compressor and Pump Compressor
Turn on Dust Collector
Last updated