> For the complete documentation index, see [llms.txt](https://tworks-wiki.gitbook.io/cnc-3-axis-turn-mill/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://tworks-wiki.gitbook.io/cnc-3-axis-turn-mill/getting-started-and-get-cutting/shutdown-procedure.md).

# Shutdown Procedure

1 . Press **Menu** ![](https://521960456-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FADAa6oJBJWHIsRduhS5M%2Fuploads%2FjFVORH1OpMFOUoRUqKKx%2Fimage.png?alt=media\&token=ea843b3b-dddf-4f66-a70e-911702c3830e)to access the menu system.

2 . Press **X-axis Jog arrows** ![](https://521960456-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FADAa6oJBJWHIsRduhS5M%2Fuploads%2FIPP5MdnaNdxQUJyZB7Sz%2Fimage.png?alt=media\&token=da097e54-d0f1-4ca0-bc46-16d6c69e4467)until shutwoen is highlighted in blue.

3 . Press **Enter** ![](https://521960456-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FADAa6oJBJWHIsRduhS5M%2Fuploads%2FbhiX4rhRAtsgtRJUS6uN%2Fimage.png?alt=media\&token=8fd3cd17-14d0-4e4d-b50c-1905ad39b213) to access the shutdown sequence, Operators may press **Y-axis Jog arrows** ![](https://521960456-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FADAa6oJBJWHIsRduhS5M%2Fuploads%2FOkChx2GhDnqHdr082S09%2Fimage.png?alt=media\&token=473e76b0-8ff6-46bc-a954-80dfc89c8b51)to move between yes and No.

<figure><img src="https://521960456-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FADAa6oJBJWHIsRduhS5M%2Fuploads%2Fp53ooEiuDqN13sP7VtER%2Fimage.png?alt=media&amp;token=b4457a6c-6dc7-4ae1-8cfa-725d2490d2ef" alt="" width="375"><figcaption></figcaption></figure>

4 . Press **Enter** ![](https://521960456-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FADAa6oJBJWHIsRduhS5M%2Fuploads%2FbhiX4rhRAtsgtRJUS6uN%2Fimage.png?alt=media\&token=8fd3cd17-14d0-4e4d-b50c-1905ad39b213)when Yes is higlighted to shutdown the machine. The system will disable the motor drives and prompt the operator when it is safe to power down the machine, If No is sleected , them the display will return to the main menu.

5 . Turn off the multicam Machine box  and the MCB

<div><figure><img src="https://521960456-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FADAa6oJBJWHIsRduhS5M%2Fuploads%2FEbUj6D0rETkBTzEAHakV%2FWhatsApp%20Image%202024-07-25%20at%2015.43.11_eefbad21.jpg?alt=media&amp;token=caff4b26-921c-4316-b0d4-3ff9ff2b1b13" alt="" width="563"><figcaption><p>Machine box off</p></figcaption></figure> <figure><img src="https://521960456-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FADAa6oJBJWHIsRduhS5M%2Fuploads%2FKDwsBMljjOpDDz1fBzP5%2FWhatsApp%20Image%202024-07-25%20at%2015.43.12_53789675.jpg?alt=media&amp;token=aac8d52e-c05a-4a88-acac-ca205fee9114" alt="" width="563"><figcaption><p>MCB off</p></figcaption></figure></div>

6 . Turn off the Pump and the Vaccum box

<div><figure><img src="https://521960456-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FADAa6oJBJWHIsRduhS5M%2Fuploads%2FjS3uc91UIO9yuhgzxAZN%2FWhatsApp%20Image%202024-07-25%20at%2015.43.12_60e322b7.jpg?alt=media&amp;token=01e4cd30-b5c1-4175-b05e-3d518757c7de" alt="" width="563"><figcaption><p>Pump OFF</p></figcaption></figure> <figure><img src="https://521960456-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FADAa6oJBJWHIsRduhS5M%2Fuploads%2FIpCjpcNZV0L59IS61Sg0%2FWhatsApp%20Image%202024-07-25%20at%2015.43.12_ee99a27c.jpg?alt=media&amp;token=01c553aa-192d-4a27-ab53-fe4d2bf03bf3" alt="" width="563"><figcaption><p>Vaccum Switch OFF</p></figcaption></figure></div>

7 . Clean the Bed of the CNC as well as the surrounding area after the machining is done by using the Vaccum Machine.And ensure safety while cleaning at danger areas.