🎰
CNC - 3 Axis Turn Mill
  • WELCOME
    • What is a CNC Router ATC
  • SPECIFICATIONS
    • What is its workflow
  • FUNCTIONS
    • Possible operations
    • Applications
    • Structure of the main components
  • CHUKS , COLLETS AND TOOL BITS
    • Difference between a Chuck , Collet and Tool bit ?
    • Collet
    • Tool Bits
  • Getting Started and Get Cutting !
    • Softwares used and File types
    • Materials
    • Setting up Design
    • Giving Toolpaths
    • Preview , Summary and Saving file
    • Executing
    • Controls
    • Startup Procedure
    • Change / Remove Tool
    • Calibrate New Tools
    • Set HOME
    • Set maximum depth and surface
    • Dry Run
    • Shutdown Procedure
  • Danger Areas and Safety Procedures
    • Do's and Dont's
    • Safety and Monitoring
    • Emergency Stop
    • Hazard Warning Areas of CNC
    • Danger Areas In Machine
    • Troubleshooting
  • Cleaning and maintenance
    • General
    • Daily Maintenance
    • Weekly maintenance
    • Monthly maintenance
    • Annual maintenance (By authorized maintenance personnel only)
  • Tips and Tricks
    • Tabs in Machining
    • Testing
    • Recovering loss of power
    • Special keys and shortcuts
    • Reference
    • Resources
    • Files
Powered by GitBook
On this page
  1. Tips and Tricks

Recovering loss of power

PreviousTestingNextSpecial keys and shortcuts

Last updated 10 months ago

1 . When set Home (0,0) is pressed the X,Y locations are stored in the controller's memory. If the system loses power , the job can be restored by returning to the last home and running Poximity Restart.

2 . Power can be applied back to the machine by pressing Find Home to index the machine.

3 . When the machine has completed the find Home function , the operator should press Return to Home 0 to move the machine back to the last home position and set home there before re-establishing the set surface (Z=0), CUt Depth, Tool Lift, Cut Speed, and Z plunge Feed.

4 . The proximity Restart function can then be used to resume the file.